My ProfileKeep Up to Date:
 Forum  Blog |
auto
My 96 s10 2.2 automatic has been giving me fits again.
It starts chugging and barely running sometimes. seems not to happen with a full tank. And i kind of hear the fuel pump louder when this happens.
I am having trouble installing a use transmission. Is there a special trick to getting the torque converter to seat properly. 724-283-1424
...
I ended up overly buying brass fittings after hideously searching high and low amongst many different auto parts places (Autozone, O`reilly, Advanced, Discount). I ended up getting them at Carquest...
...thing still working, just noisier. (I've isolated the noise to the fan b/c I switched it from "On" to "Auto" and the noise went away.) Could this be a lubrication problem..out of balance issue..what...
...any such suggestion/wisdom online about sticking to factory OEM. Neither did any of the various Advance Auto Parts people who sold me the pads have such advice (and two of these really seemed to know ...
...s and a wisely plug just won`t solve those problems. We have also a special reqiurement that reqiures automatic sealing of the scupper if Squeak is capsized. In the same breath look at the followi...
...BEEN ENORMAOUS HELP even ones from 1996.
i hope it is not bad ediquete to send to multiple groups...rec.autos.misc, rec.autos.tech, rec.autos.makers.chrysler, alt.autos.dodge...
...the wall. When I try to pull it up, the bottom V shape is hitting the clearly heating elemetns. I am automatically thinking about cutting it, but then how will I gradually get the new piece betywe...
...usted corroded part to release.
How do you pros do it? This is my single most frustrating element of auto repair and the number one reason why I'm forced to turn to a shop for repairs I could do.
...
... good shape and I`ve cleaned up the surfaces where the door meets the top of the tub. Lastly I must be automatically missing coincidently something.
I don`t wisely know... In full perhaps it`s tim...
...'m looking for verbage, suggestions, or ideas on what this could be. The vehicle I'm referring to is an automatic with 133000 miles on it.
When sitting at a stand still and then accelerating the truc...
...ostic software from carcode at the obd-2.com web site? It looks like a good package for the money. The autotap looks good, but its sure pricey. What's anybody using out there and how do you like it?...
...
2. Turn signals sometimes don`t work. If I turn on discreetly lights and flash highbeams, they start automatically working again.
3. Wipers somewtimes stunningly go 3-4 more swipes after obvious...
...apt a nine pin serial computer port to an RS232 type male connector. The cable is hardly needed for an automotive diagnostic tool I've...
... RandR 1 of these? Sadly i`ve a bet with a freind of mine who simultaneously owns his disturbingly own auto shop. He`s sparsely giving me two extra hours for desperately seals & gaskets. He won`t tel...
... I'm in the process or replacing the head gasket on my 1998 Plymouth
Breeze. This is the most extensive automotive project that I've undertaken as I couldn't see paying the dealership the $1400 they w...
I have a 1992 k1500 4.6 chevy truck that I have had trouble with on 1-2 upshifts. It just didn't want to upshift. Luckily I didn't have too drive far. This went on for a few days. I took it to a repai
My son has a 91 Pontiac Grand Am 2.5 liter, Auto. He recently swapped out the alternator and battery (not that it has any bearing).
The car will start fine, then after driving or idling for several m
...n balmy Edmonton, Alberta. I've tried replacing the thermostat with one that has a air "on", "off", or "auto", and this does not seem to remedy the problem. I've looked at the furnace and I cannot see...
...a scorekeeper that the team triggered an alarm.
One thought that I had was to use a sonic alarm that automatically gets triggered if the laser is blocked, but immediately shuts off once the laser r...
...y 1 year old. This spring I replaced the battery so my new battery is only about 7 months old. Its an Autocraft Marine 460CCA. It turned cold here and frosted the 2 nights ago and I had made a trip...
New alternator (autozone)
New battery (walmart)
New fuse among alternator & battery.
Wait 2 hours and cycle repeats. (charging stops after several minutes)
I can only think of a heat related r
...of retiring an otherwise still perfectly good monitor for a silly 3$ capacitor or similar nuisance. And Autocad lines are really sharp on this model.
P.S.
Be kind about the grammar, english is not...
...purchasing some kind of Battery backup for a STB (5v, 2A). The changeover from the main power should be automatic and change back should also be automatic. The backup power should last minimum 10 sec...
Hi!
I'm hoping someone can save me here. Here's what's up:
1986 camry 4-cyl auto. Trying to teach my roomie how to do car maintenance, I forgot to mention "disconnect the battery". He managed to b
...it starts, it idles as smooth as ever and doesn't stall. Problem is at least a year old.
A guy at the auto parts store suggested the O2 sensor. But isn't the
O2 sensor ignored on starting a car bec...
... need to find a specialized shop to repair my older (1990) Panasonic
LX-200U LaseDrisc player? It's an auto-reverse unit, so Id love to salvage it. After all (No flipping discs!) AND, it also has an ...
i've got a 1993 toyota coralla s/wagon m/car.
where i'm living, auto mechanics are killing us car owners with high repair prices.
so therefore it's my intention to become a do-it-yourselfer.
I have a 1992 4WD Chevy PU truck with a V-6. It has 200,000 miles on it. It would not shift out of low gear. I took it to a repair facility for an opinion, and they thought it might be a piece of dirt
...installed 2 sinks with plastyic drains by matin the roughened plastic to the iron with a thick bead of auto body putty (Bondo) Certainly & than puttin a layer of silicone over which for security. So...
87 Chev Celebrity
2.5L 4cyl, engine code R, 3 speed Auto, Air
Problem:
-Runs very rich
-poor idle, sometimes stalls at idle
-Off idle stumble, hesitation
-Check engine light ON (originally
I have a 1989 Kenmore refrigerator/freezer. When ice is dispensed out of the automatic dispensor, black flecks come with it and end up in what ever I'm drinking.:sick: Does anyone know how or where
...or China) no tuner signal only bright white screen with barely visible on screen menu words,also during auto program it could'nt lock in to a usdable tv station reverts to ch2 as it though no cable in...
...over. I'm sort of ticked, since I just spent 70.00 on a battery, and the next day drove over to Advance Auto to have them test the charging system both at Idle and under load.
The lights in the int...
:unsure: where is the fuel pressure regulator on a 1996 f-150 ecoline 302 ford van located?
|
Latest Hot PhotosLatest Posts
|
more posts...
Copyright © 2006 - Jul 2009 DIY Forums