New Topic
 
  Posted 6 Months, 2 Weeks ago
romana0101
Fresh Boarder
Posts: 1
graphgraph
User Offline
 
When my
http://puregizmo.com/watts-dishwasher-disposal- connection/p.clf381248dw.shtml
dishwasher drains the water comes out the overflow valve on the top of the sink. I ran the garbage disposal and reached in, nothing in there. The water drains freely when I run the sink faucet on high. If I fill up the sink with water and pull the drain plug, the water drains freely. Any ideas would be appreciated. Thank you
Reply New Topic
  Posted 6 Months, 2 Weeks ago
lexmarks567
Admin
Posts: 340
graphgraph
User Offline
 
is this a new dishwasher or garbage disposal that was just installed. check to see if the hose is clogged or kinked or if the knock out plug on the disposal is in place. if it is you will need a hammer and screw driver to knock it out.
Last Edit: 2009/04/23 02:31 By lexmarks567.
Reply New Topic
  Posted 4 Months, 1 Week ago
dbravo
Fresh Boarder
Posts: 1
graphgraph
User Offline
 
Check pump motor for reversing during the pump out make sure the dishwasher is pausing between the wash and drain cycles letting the pump/motor reverse for the drain cycle.
Reply New Topic

Related Posts:

The Content on this site is provided for general information purposes only. It can not and should not be a substitute for face-to-face professional advice. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2009 DIY Forums