Ask A Question
 
sambo55
Fresh Boarder
Blog Posts: 0
Forum Posts: 2
Rating: 0ApplaudCriticize
Posted 7 Months, 2 Weeks ago #1
I'm in the last stages of building a canadian canoe. I have treated the surfaces inside and out with two coats West Systems epoxy resin. During the process I applied resin of the same mix to test pieces. I have been unable to achieve satifactory adhesion of International Original Varnish to the test pieces.

I applied the resin more than a week ago and it does seem to have cured even though the weather has been rather 'e-poxy'.
Moderator
Moderator
HeavyD10000
Blog Posts: 0
Forum Posts: 522
Rating: 5ApplaudCriticize
Posted 7 Months, 2 Weeks ago #2
Have a look here - http://westsystem.com/ss/varnish-over-epoxy/
sambo55
Fresh Boarder
Blog Posts: 0
Forum Posts: 2
Rating: 0ApplaudCriticize
Posted 7 Months, 2 Weeks ago #3
Hi MyToyotaSucks, Had a look at your suggested web site, massive amount of info, don't know how I missed it the number of times I've visitted West Systems site. Thanks a bunch.

Related Posts:

Spread the Word!

Four out of five users would recommend us to a friend. Shouldn't you?
Link to Us    Tell a Friend
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 DIY Forums