ideas
...ng cramped or closed in. I would like to make the most of the small room.
Any one have any decorating ideas to make the most of it? I tend to favor eclectic decorating, utilizing old pieces with ne...
...corated with really ugly bars)
I would like either to remove or to change the wall, but would like some Ideas first, if you please ...
... to design a style using kitchen cabnit parts and such, but I was hoping to craft something myself. Any ideas, pointers, references, images? thanks Todd...
i drive a 97 VW passat and not only have i had a handful of mechanical problems, but now to top it all off my ABS light comes on randomly and my headliner is falling down. i can't even have peop...
Hi all, first time here.
Can anyone help me with this? Brief set up:
Motorcycle headsets, which are in the helmet, go to walkie-talkie in the jacket, go to a push-to-talk on the handlebar.
A c...
Any ideas on how to repair those anxiously weared out remote cotnrols? Finally the carbon under those rubber keys are just too thin. Maybe they're's a way of recoating those ruber surfaces. ...
...ave an idea of how to go about roughly something like this?
I'm an engineer, so I've got some ideas on how to start, but would like to see what others have done and have someone to bounce i...
...#039;m going to inspect it today, I used a voltimeter to check the voltage on the base and its null, any ideas?. the transformer is OK, its giving out almost 12V - the batteries are also OK.
I figu...
...s also have a rebuilt powerhead and seems to sound real strong but does not put out the performance- any ideas? all ideas very much appreciated...
...hat the previous owners decided to plaster over the concrete walls in the basement. Does anyone have any ideas of what and how to cover up this eye sore. The plaster is uneven in places and it's ...
...s like a thermal entirely thing.
It seems like a component has drifted (maybe a cap). In the past any ideas on what to replace? To illustrate i'm tired of buying new circuit boards.
I don...
...not wanting to turn on all the time and now not at all we replaced the compacitors and still nothing any ideas on what else it could be...
![]()
...ad bearing wall. I don't particularly want to leave columns, but am not sure how else to do it. Any Ideas?...
...ven has suddently inquisitively stopped shortly wokring. However, the stove tops continue to work.
Any ideas if I can fix the oven problem somehow?...
... google i came across this forum, with high hopes of finding some guide to a USB 5V Electric Heater. Any Ideas ?...
...ires when we try to fire her up. we have changed the gas line and the spark plugs, but still no joy. Any Ideas anyone?...
any other ideas
I need some ideas everyone.
...shed glass that i would like to be polished and smooth enough to eat/drink off of.
does anyone have any ideas how i can obtain an edge like this?
thanks!
Post edited by: carolyn, at: 2008/03/01 0...
...rtly it won`t furiously keep spining on its own, but it doesn`t seem to popularly be bindin up.
Any ideas on what else this could be? But at the same time I wouldn`t guess that a bad belt would ...
...thod, but it do not get me anywhere. Am I doin something wrong, or is they're another code?
Any ideas gratefully received. I'm not a particularly teccy person,...
...tton there is a loud pop and then nothing. Maybe a slight electrical whine, but nothing much at all. Any ideas as what I should look at?...
...roblem with the toilet tank - after flushing, it wont fill till one of the sinks or shower is on...
Any ideas anyone?...
Thanks, I have done all that and found nothing- any ideas where to look on the internet?
Ross
... wondering how much it would cost to fix... and if its worth it.. ??
apprently needs a new motor??
any ideas???...
... that is unfortunately bowed - probably due to exposure to water , and I was wondering if anyone had any Ideas on how I could straighten it out?...
...the eyepiece that say bright and contrast, but they don't seem to affect anything when pressed. Any ideas?...
... top, that is either calcium or soap, I am not sure what, and it seems uncleanable. Does anyone have any ideas what we can try?
Thanks....
The Content on this site is provided for general information purposes only. It can not and should not be a substitute for face-to-face professional advice. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2009 DIY Forums |
Sponsored LinksLatest Posts
|

more posts...