model
Sears tractor model# 917.288121 21 horse. Snowblower attachment works fine, but... clutch return spring interfers with idler pulley on disengagement. Any advice?
hardware = KDS product # k-22mdwb model #22oow
long story short ha ha ...
i received this monitor DOA in a trade . so i do not know the original circumstances but i have managed to repair it to ...
I have a Maytag washer model MTW5740TQ0. The washer goes through all the cycles but the tub does not spin in the spin cycle. I can hear the shaft turning but the tub does not spin
i Cannot shift into gear in my car. my car model is 2003 mercedes vito 110.
Mitsu model ws-48311 has started discoloring gradually over a 2 hour period until it completely goes to black and white. The tv can be turned off for a period of 1 hour and when turned back on it app...
The auger belt keeps getting chewed up // but the pulley seems in line. My neighbor caught a coat in the auger and broke the belt. now the belt desentigrates every time I put pressure on the auger han...
Warnock Hersey Fireplace
Model # 36RS
SN 004156
Date 01-89
Need "clip" (keeper, stay, hold - metal strip about 2" long 3/8" wide) that keeps the bi-fold fireplace door in upr...
my MTD snowblower 31A slipping from 1st to 5th. Model# 31A E665E118 about 8 years old
A 3 in wide bright blue irregular band down the right edge of screen. picture ok and shows through blue area. Started in lower right corner and is getting larger. no other problems and no blinking lig...
Screen has suddenly shrunk from both sides.
When I connect my computer to DVI port on
the back of the tv, I get voltage feed back thru the DVI cable to the computer which if left alone would burn. It works great for a short time then it puts a...
When changing channel TV says disconnect front AV jacks. Also in the front right corner it says comport and that bounces up and down. Can it be fixed?
I have sound but no picture and would like
to get a hold of a circuit schematics for
this TV.Here are some other numbers printed on the PC board: 19v-683-0376;
5088 and 4551-20033010.
If there is ...
SINCE I HAVE CABLE THE T.V IS ON CHANNEL 3. BUT CHANNEL 3 WITH CABLE ALL OF MY CHANNELS COME OUT FUZZY FOR ABOUT 10 TO 20 MINUTES. AND THEN CLEARS UP NEED HELP FIXING THIS PROBLEM.
My snowblower does not move forward in first gear after having used it in 2nd or 3rd gear. Eventually after holding the lever down it will move in first gear. Has anyone had this problem?
Hey There!
I've got this built-in surround sound TV with sound only coming out of the left side. Any one out there know where to begin fixing this problem?
Thanks
This dryer rotates but does not heat. Economics prevent calling in a pro. I am pretty handy on my own, so with some good instructions..pictures help too, I can fix it.
Any suggestions. And yes I have...
my water dispenser & ice maker is not working.
any help on what i should be checking?
My washer will not agitate on the wash cycle...sounds almost like it wants to but won't...then when it's on the spin cycle it agitats and then spins fine this washer is only 3 or 4 years ol...
How do I change the shear pin for the auger?
Bought this item on ebay go figure, unit powers up fine and the battery holds a charge, but when I look into the eye piece my view is rolling, like a tracking issue, this occurs both when in cam mode ...
the picture bows in on both sides of the screen the left side has a red and yellow bow right has blue and light blue bow kind of like a hour glass what could it be
Our 3 week old 20 inch flat CRT screen Advent TV, when it was turned on, came up with a 6 inch horizontal blue band. Was working fine when turned off last night. Power on/off on remote still works ...
My Television made a buzz sound and went completely off. No power. I tried turning it back on, unplugging and plugging in again; a different electrical outlet - nothing. I took off the back panel a...
How to replace the gasket on the door and glass
I have a really old Gravely. Have used it over the years only occasionally. I recently reset the magneto points, set the valves, etc. It started and ran a while. I stopped to put more gas in and i...
How do I fix the drum paddles in this machine. I fitted one set by pushing them down and sliding along but they came detached after one wash.
Any Ideas please ?
Regards Colin.
tv will not power on. will uplug and plug back in after few minutes - green light will come on and blink but will turn itself off after a couple of minutes. will not even turn the screen on or hear an...
was working great, but it has been sitting for a couple months, then it just wont recognize dvds at all factory etc. opened and check connections, ?? everything looks right, but it hasnt moved, dvds s...
Our 8 year old washer sometimes does not drain or spin. At the end of cycle, we can usually see water. I can sometimes work around it by forcing the machine to go back to the draining/spinning cycle...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 DIY Forums |
TIP: Write your question in details [ why? ]
Sponsored LinksLatest Posts
|
more posts...