Mitsubishi Model# vs-5076 picture is getting dark, Bright and Contrast all the way up, can it be fixed by me or do I need a professional. How can I fix, if I can? Thanx
hd tv no picture only sound. What could it be?
The picture on my old Zenith Tv is too dark. How can this be fixed?
I have a 32" panasonic tv manufactured in 1998. trying to brighten picture but have brightness all the way up and its still on the dark side????? objects also seem slightly blurry around the outs...
magnavox 26mf605w have no picture only sound. What could it be?
magnavox 9p5511 no picture no sound. has power
I have a 27 or 32" JVC tube type tv thats maybe 6 to 8 years old that looses picture & sound at the same time - picture does'nt totally go out it just turns blue.
Now I've checke...
...u wasted your money i was a rca /zenith dealer for 31 yrs.your problem is the classic yoke failure this tv picture tube and yoke is bonded together and can not be replaced seperately. picture tube an...
Hey,I am getting ready to take my 57inch Hitachi projection tv to the shop tommorrowbecause the picture is completely grren. Do you have any sugestions on what it might be?
my old 42inch rear projection rca tv has no picture but a blue light it does have sound and i can see the tv and volume lettering when i hit them anyone know what the problem s
I have a sony kp46wt510 and the picture on it looks like if I was watching it on 3d
...s it all. Last year we replaced the IC's to repair our convergence issues and now this morning the TV picture dissapeared, the blue light on the front started flashing and there was a pulsing sou...
...hold, or V-hold, button on the television set.
Turn the vertical-hold button slowly until the displayed picture slows and eventually stops rolling. If the picture rolling speed increases, slowly tu...
have a rca hd56w58 tv powerlight comes on but no picture or sound can here clicking when powered on and off what could be wrong
...elanimations off the windings.this is know as key stone wedge configuration.most newer tv sets to fix this picture tube and yoke are one of the same if this is an rca picture tube change is required.t...
I have a hitachi 51f59a and when I turn it on the picture at the bottom 6 inches has wavy line running through it. It appears even when viewing dvd's. It appears that the color is ok, it just l...
p4677ock rear projection comes on and can see picture then turns off two times wont stay on
I have a 32' rca tv i still have sound, but the only picture is in the middle of the screen about 1/2 inch wide
Panasonic pt-47x42f projection tv won't turn on. Tv powers up but, there is no picture and after a few seconds the tv powers off and the red power light flashes 3 times.
LT-42DR1BJ JVC TV
Picture and sound are lost for 15 to 20 seconds, screen goes to blue,then after said time picture and sound returns,
Any ideas?
DJ>
...no luck - maybe I am not looking or searching for the right keywords.
I am going to try to attach a picture of what I am talking about shortly. ...
AS SHOWN IN THE PICTURE I HAVE CONNECTED.BUT STILL IT IS NOT WORKING.WHY?
... long to return to the store because of this issue I have. When I turn on the TV... It works fine... good picture, good sound. But after say, 5 or 10 minutes of playing the TV... the screen goes bla...
zenith r56w36 tv auto convergence messed up picture This is a prjection tv that is about 6 years old. I used the auto convergence feature and it shut the set off. i turned it back on and there is now...
Advent TV with distorted picture.
I am getting no picture on my Zenith plasma tv (P42W46X). I have been researching and believe it is either x sustain or z sustain board. How do you tell?
PTV-510-AH01 has no picture, has sound,power stays on.seems to have no power going to the projectors.
TV PICTURE IS O.K. WHEN FIRST TURNED ON. THEN IT DEVELOPS A LINE IN MID PORTION OF SCREEN, AND EVERTHING AOVE THE LINE IS DISTORTED? WHAT IS CAUSING THIS/
i have a tcl flat screen turned it on no picture only sound
my bush 42' popped now no picture but still have audio
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its
Terms, Rules & Privacy.
Copyright © 2006 - 2010 DIY Forums