problem
Sir
iam having a Smatron 15" colour monitor where there is not eht all voltages are correct but still there no display on the screen to please help me in this regard.
hello i have a 1988 honda accord lxi a20a3 2.0 and i replaced the clutch now when i press the petal it stays down its not the fork or the release bearing or the cable or the spring on the petal or adj...
I have an old Sony Camcorder DCR-TRV520 that fails to turn on now. Used it acouple of months ago with any problems. I want to convert some tapes to DVD but at the moment the unit only powers up for a...
hello, 3 months ago i replaced the rear brakes on my sable. Have done many brakes before and this one had no issues, easy on, easy off. Now for some reason the LR brakes seem to be adjusting inward, l...
Can you please tell me why when
I am recording on my Philips
DVD-VCR recorder that the screen
is blue..when my VCR is operating.
I can't see the TV channel that I
recording..all I get is a ...
...bout maybe 15-20 mph.
I've only taken it around the block, and it seems to have pretty significant problems. The steering is very lose, and the van pulls starting with the right, but then to t...
Hi
I am installing a second light in a room, but the only power source is a switch loop. So my question is - can I take power of the existing light fixture to create a new power source on which I can...
I have had this problem every 3-4 years with my icemaker. This is what MY problem is:
The ice tray releases the ice because the mechanism twists the tray during the end of the cycle. Sediment b...
... tv.
Model#P46920BL. chasis#PTK195KA. the picture is blurry and droops at the top. Is this a convergence problem, an IC problem, or a capacitor problem....
I've got the 4.0L Northstar in a '99 Aurora. Seen many incidences of this head bolt problem discussed on the IATN list. Is there anything I can do as far as maintenance to prevent this hap...
...in one channel, usually the right. Jiggling the volume control will fix it, but I'm not convinced the problem is there, since adjusting some other controls will fix the problem also. This seems t...
... lasts 12 mo+. I've heard of people using the gas up to 5 years later, and having it burn without a problem. I don't think that's a good idea personally! but I would say that if you m...
...r the welcome
The faucet was new, I put it in soon after we bought the house, so I am not sure if the problem existed with the old one since it isn't constant. I did just check the pipes in...
I have an `88 626 and had the same problem. I know that the year is way off, but this problem is not that uncommon. After removing my alternator from its hurriedly mounting position, I could not rem...
Have been told that using "Stop Leak" for a small seepage problem will cause other gaskets to swell. Anyone experienced this problem?
...iles. It was starting hard (2-3 long cranks to get it to start). I suspected the fuel pump (that was the problem the last two times it acted like this). I checked the pressure and, when you turned ...
etee, I got the same problem. Unfortunately I have found no solution for that problem yet. When I send a fax that is OK, but any incoming fax is a complete black page. I -obviously- will keep on looki...
Hey Sam01. I am having the EXACT same problem with one of my Craftsman door openers. One works fine while the other is having the same reception problems that yours is having. Yes, like you I have ...
Ever since my alternator burned up and I replaced it I have been having the same problem you describe. Therefore I would expect it to be an electronic probelm. If you ever find out what the deal is ...
Is it consistent now, or is the problem intermittent? This is a common symptom of a failed interconnect. (ie. the video cable running from the video board to the LCD panel) A lot of times it's...
Sounds like the button itself is possibly the problem, assuming that once it come on it stays on, and that nothing else seems to be the problem. If it exhibits the same difficulty turning on w/ the r...
...slowly during dark scenes (or parts of the picture) they are.
This is the 2nd Sony TV that has given me problems in past 3 years and don't want to throw a lot of money at a problem that may re...
Can someone diagnose my tv problem. I have a JVC rear projection HDTV that has vertical redl and blueish ines throughout the entire picture. I was hoping you could tell me what the problem was.
...arts coming down. It starts going back up again really fast at a stop light, etc..
I suspect this is a problem with the thermostat. During idle, there is not enough pressure from the radiator for ...
Hi Terry-woods welcome to the forum I have heard of this problem before, but not particularly related to Ford's pick up trucks. As a common problem this is usually solved by replacing the brake...
Is it worth fixing problem or is it going to be a costly adventure?????? I have replaced fuse 3 x only to have same problem .....
I have the same problem with my 95' neon. I wanted to know if you ever found a solution. Or if anyone else has an idea about what the problem could be.
If you have a solution for this problem...
Just to let you know, I replaced the HX myself because I could not find a plumber to do it and the problem has been solved. I'm very suprised not to hear of this problem before!!!
Dave
I have a 98 Elantra. For over a year I have been having problems with the transmission when at low gears. 1st and 2nd usually. There would be a delay when switching from 1st to 2nd gear. The engine w...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 DIY Forums |
TIP: Write your question in details [ why? ]
Sponsored LinksLatest Posts
|
more posts...