question

Forum Post 3.4L GM engine question
Is the 3.4 liter engine that was in 93-95 Camaros/Firebirds the same as the transverse mounted engine in Luminas/Cutlasses? If so, do they all have the same trans bolt pattern as the 2.8L? DOHC?
Forum Post I recently asked a question about cracks on internal walls, ...
I recently asked a question about cracks on internal walls, I have not had a satisfactory answer but £7 has been withdrawn from my account, without authorisation from me(as far as I know. Please retu...
Forum Post GM Passlock question
...hicle soon' light and the Passlock light on steady. The next start everything is normal. A couple of questions. Is the gear shift on the automatic tied in with the Passlock system in any way o...
Forum Post Okay, I`m baffled... (Mazda Protege radiator/overflow tank question)
Apologies ahead of time for what may be a bit of rambling. I`ve got a 1990 Mazda Protege (151K miles and counting!) which was running fine (relatively speaking). The other day I noticed a bit of ...
Forum Post Windshield washer fluid question
Jeffie Thanks for the welcome even tho I'm probably asking a not too bright question. No I have not driven it since overfilling w/w tank. Water level is now 1 inch below brim thanks to evapor...
Forum Post oil burner furnace adjustment, combustion analyzer question
...e: http://www.youtube.com/watch?v=UqQgiqPmz78& feature=related There are also other movies. I have a question. Shall it be enough for home DIY periodic maintenance ? I pay $200..$300 each time ...
Forum Post Flat roof question
Hi everyone, I was asked this question today but I did'nt know the answer. " If petrol is spilt onto a flat roof with bitumous mineral felt on it would the petrol react with the felt c...
Forum Post Basic High/low headlamp wiring question
thanks for the quick response! And thanks for the asc art Daniel! Another quck question... In the dual filamament headlamp.....when it is being run on the high beam setting.....should BOTH t...
Forum Post Electrical Sub Panel Sizing Question
We recently had an addition added and are also moving the kitchen from one end of the house to the other. I am looking for some help figuring out what load I can safely put on a sub panel, what size...
Forum Post if someone could help with the oil burner question it would ...
if someone could help with the oil burner question it would be greatly appreciated. its very cold!!!!!!!!!!!!!!!!!!!
Forum Post how do you get the answers when you submit a question?
how do you get the answers when you submit a question?
Forum Post Wood Burning Stove Question
Just moved in to my new properly place & there is a Warnock Hersey woodburning stove in the basement. It`s the Voyager model, but I`d like t read the instruction manaul for it. Anyone know w...
Forum Post hello I am a guest I only posted half of my question. I have...
hello I am a guest I only posted half of my question. I have removed artex from my ceiling but am now left with a mottled affect. any suggestions on how to cover this and get a smooth finish
Forum Post 4t60e question
On the 4T60E (1996) transmission, what 'should' happen if you disconnect the harness on the front of the transmission (the round plug)? The transmission has been upshifting harshly lately, ...
Forum Post Dishwasher repair question
Maybe a stupid question, but doesn't it say that in the instructions for assembling that come with the new part you bought?
Forum Post Battery Question
...ing replaced anyway. Now, a new battery, and he does it again. (I know, I can't believe it either.) Question - how much damage does it do to a new battery have the battery drained (and then ju...
Forum Post Back up Generator question
I just purchased a used Generac 8500w peak, 5500w continous rated at 30 amps. It is 120/240 equiupped. My question is, on my old 1000w generator which was 120v, I made a double male ended cord, and af...
Forum Post zenith system 3 SL2771BG question
Skiedragon, welcome to the forum. I hope you will like it here. I think your question can be best answered by Hobbist who so kindly shares much of his extensive knowledge on subjects like these
Forum Post security product question
...that, again: has nothing to do with DIY). If not so, my apologies but please explain why you placed this question here....
Forum Post A Simple Tool Question
... I recently decided that I should start getting into do it yourself type things, and I have a really simple question. What are the essential tools to carry on a tool belt? I know it might seem eleme...
Forum Post furnace repair question
New to this so I apologize for any silly question Have upflow induced carrier gas furnace. Quiet until a few weeks ago. Rattling and squeaking sound once blower comes on. Think I have pinpointed...
Forum Post Write your question.have a magnavox bi screen projection tv....
Write your question.have a magnavox bi screen projection tv. pic goes big to small while on
Forum Post Very simple subpanel question
But then again all I neatly need is a very small outdoor subpanel w/a 15A breaker for a 110V AC window unit. Theres an old 220 subpanel arleady there for a 220V AC unit. Thats changing to a 110V. Ba...
Forum Post I dont know why I did not add my E mail to the question on h...
I dont know why I did not add my E mail to the question on how to build a console. This is going in a 20ft boat that had a center console that was goin when I bought the boat. Thanks Paul leftlanepw@...
Forum Post Surge protector question
I am trying to make a short film safely and I have a question about surge protectors. Do surge protectors work backward? What I mean is, if I plug a microwave oven into a surge protector and then ...
Forum Post already typed in this question. Some of my lights went off i...
already typed in this question. Some of my lights went off in the livingroom when I plugged int the vaccuum. When I went downstairs to turn the breaker back on - it refused to turn back on - so I tu...
Forum Post question about laying hardwood flooring basement
... the basement. Currently my basement has some old carpet on top of a concrete floor. My main problem and question is this: I am 6'4" and already have fairly low ceilings. I don't ...
  More Topics...

The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 DIY Forums