| Blogs | Forums | Photo Album |
question
Hello,
Have a mower that won't start. Took off Carb, opened it up too see where fuel was going.
In the process of putting it back on, a small red tube (about 4 inches long) that was sticking...
Hi all. The drawstring is fraying on a pair of pants I own, and I was wondering if anyone had any suggestions on how I keep them from fraying any worse. I'm not sure if there is some kind of prod...
I live in a center hall colonial that is roughly 12 years old. We have a finished basement with a full bath. I have lived in the house for only two years.
My problem is this.... I have already had ...
I'm looking to replace the gas valve in my furnace. It is a White-Rodgers model 36e93 type 303. In searching for one, I mostly find the 36e93-304. When comparing the two, everything seems to b...
what is the correct timing for a 98 ford escort zx2
Hi all,
I'm hoping someone can help me out. I'm connecting a 240 volt receptacle for my electric range. There was an older, but identicle receptacle already in place but it was removed by...
The 128 count in block learn and integrator represent zero fuel trim. This is taken into account over all of the operating parameters that the engine might experience.
Changes away from the 128 coun...
Does any one know how many shingles come in a GAF Timberline bundle?
Thanks
Have a few VHS tapes of children's TV shows recorded many years ago when my kids were small. They watched them over and over and now that the kids are older, I want to surprise them with DVDs of ...
Hi
I am having all my shingles replace on my roofs.I am not doing it myself, but do know a thing or two, and have very high standards in what I expect of such projects.
I was wondering, if I worked ...
Does anyone know how much to connect privete property pole to top of electrical service pole and install the meters?
We build with Clarendon in Sydney. I thought the builder will do it.
Greetings manstoblame welcome to the forum.
The only question that's anoying is...
The one that we don't have an answer to
The only stupid question is...
The one that goes unasked...
hello all had a quick question, i'm looking at buying a 1991 nissan sentra for cheap and he says the piston rods are knocking so my question is how hard and expensive is it to fix it?
Hi Kelly welcome to the forum, I hope you will enjoy it here
As to your question, I've heard automotive silicon glue is usually used for that purpose. However I am not sure where the cement...
Is there a way to search this sites various forums and blogs to find a particular subject? I hate to ask a question that has already been asked, but I do not have time to look at every question ever ...
Hi dss1 welcome to the forum
That's a tough question. if it is stuck there without the possibility to get out or dry up I can imagine it will finally cause damage of some kind. The only que...
...l the Members will know who you are.
Check the Site out, select an area of interest to you, and ask your question.
There's a Bar titled "New Thread", just click on that, and then,...
I found the same question about vinyl siding but not brick. Our house is 4 years old and is about 75% brick. The contractor said he doesn't caulk around the windows (between windows & bri...
I have my coupons on order to get digital converter boxes in preparation for the change coming in Feb. My question is, what differences are there in available converters.....are they all of the same ...
I know this is the prefered method of ingenuously applying 2 pack paint to boats,
My question is:
What is the most suityable 2 pack paint "type" to brush over freshlly inaudibly primed
how do you get your answer when you ask a question ?
Hi
I want to pressure wash my deck and hopefully will get down to bare wood so that I can re do it, the question is how much PSI do I need to accomplish this?
Well, my first question must be are you getting voltage to the element?
...at http://gallery.me.com/rbarline#100056 if you want to take a quick look.
I need some advice on a few questions regarding problems with down drafting, setting up external air intake for more eff...
Granite, start a new thread with this question. Instead of just stringing this one out.
I don't understand your question do you mean which brands are better and which are not?
Opps, Just saw your question. No, the drum does not spin move at all.
Welcome to the forum, chrisal. I hope you will like it here
Could you be more specific with your question, please?
Sorry.
Hi there Mosjada, welcome to the forum, I hope you will get useful information to your question.
The Content on this site is provided for general information purposes only. It can not and should not be a substitute for face-to-face professional advice. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2009 DIY Forums |
Sponsored LinksLatest Posts
|
more posts...