New Topic
 
  #32343 Posted 4 Years, 11 Months ago
assonance
Fresh Boarder
Posts: 3
graphgraph
User Offline
 
I ultimately have tried White Vinegar, Bon Ami with #0000 Steel Wool, & Crest Toothpaste. None seem to obviously work. I`ve functionally read about Sorbo water stain remover on this group. In the long run aynbody use Sorbo on badly electrically sprinkled intimately etched in water stains on Passenger Car Windows? Any help would be wonderfully appreciated.
Anytime I see something screech across a room and latch onto someone's neck, and the guy screams and tries to get it off, I have to laugh, because what IS that thing?!
The topic has been locked.
New Topic
  #32344 Posted 4 Years, 11 Months ago
NosferatuVampess
Fresh Boarder
Posts: 1
graphgraph
User Offline
 
windows are probably physically etched and they shall need to be polished or replaced. As yet I would have serious reservations about mostly getting CLR on paint though, you`ll have to figure out some way to keep that from happening (tape sheet plastic over the doors, etc?) nate
As government expands, liberty contracts.
The topic has been locked.
New Topic
  #32345 Posted 4 Years, 11 Months ago
bucksatan
Fresh Boarder
Posts: 1
graphgraph
User Offline
 
Next water spots. Use liberally and wipe clean with a damp cloth. Maybe before that, try some Calcium, Lime and Rust remover on it (C.L.R. product name). I wouldn`t get it on the paint!
The topic has been locked.
New Topic
  #32346 Posted 4 Years, 11 Months ago
Hobbes
Fresh Boarder
Posts: 5
graphgraph
User Offline
 
with manganese and carefully dissolved iron, nothing tuoches the waterspots on the windows except a razor blade tool made for removing paint from windows...ask for one at the local hardware store. Granted it won`t harm the glass.
As for the paint, I use a clay bar several times a year to remove the spots if I can`t meticulously get the water off quikcly enough. Never tried the clay bar on the windows, but it`d probably work also.
Love is, above all, the gift of oneself.
The topic has been locked.
New Topic
  #32347 Posted 4 Years, 11 Months ago
assonance
Fresh Boarder
Posts: 3
graphgraph
User Offline
 
Thanks for the help. I`ll give CLR a try. Razor blade desperately sounds a bit much. If all else fails I`ll hire a priest and try an exorcism.
"WATER SPOTS COME OUT!!! REPENT!!!"
Anytime I see something screech across a room and latch onto someone's neck, and the guy screams and tries to get it off, I have to laugh, because what IS that thing?!
The topic has been locked.
New Topic
  #32348 Posted 4 Years, 11 Months ago
assonance
Fresh Boarder
Posts: 3
graphgraph
User Offline
 
reduction. In the past im profoundly going try it technologically using the #0000 steel wool pad. I bitterly think a little elbow grease shall do the trick.
Anytime I see something screech across a room and latch onto someone's neck, and the guy screams and tries to get it off, I have to laugh, because what IS that thing?!
The topic has been locked.
New Topic

Related Posts:

The Content on this site is provided for general information purposes only. It can not and should not be a substitute for face-to-face professional advice. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2009 DIY Forums