| Blogs | Forums | Photo Album |
wood 
...ically know it`s the best thing to ecologically do, but is it possible to broadly put tile adhesive on wood and periodically expect the tile to last awhile? It shall be a floor tile, with only littl...
For example im looking for some plans to build a wood water ski. Can anyone point me in the direction where I might find a guide for materials and a how to plan of creating a wood salom water ski.
Need wood flooring but unsure which type? This free profiler tool could help. Answer a few multi-choice questions and it will give you individualised advice to aid you in choosing the right type of wo...
Hi
I need to replace some rotting wood that I have under the siding. I was wondering if anyone could give me any advice about going about it - Like what to replace the wood with, and maybe how to tre...
I have some dark stained wood furniture that I want to paint white. I was wondering what the best sealer would be, and also, if I needed a primer?
Thanks
Added a wood burning furnace this year.Every two days or so I have a fine white dust on the tv and furniture. Is this normal with burning wood.Thanks Greg
We need parts for a central machinery wood planner. Where can we get them. It was purchased I understand possibly though you. Can they be repaired through you????
what tile adhesive should i use for
wood
i have a wood burning stove tested by warnock hersey.its a mountain glo made i think by rms inc out of chilliwack bc.is it possible to find a manual on this stove
The cow teacher the wood industry the limited liability company is a profession is engaged in the high new technique product development and produce and study of business enterprise company, in 2006 ...
we are looking at Somerset wood flooring 3/4" solid oak. Some will be installed over crawl space area. We were told by a salesperson before that the wider you go on the wood (say 4 or 5 inch) t...
...d strong materials used for indoor and outdoor furniture. Why don't you think about that??
1)Teak wood is good-looking, smooth, sturdy and durable.
2) It is resistant to bad weather and inse...
I would like to be able to heat water through my wood stove and feed in to my boiler using the heat assembly on the side of the boiler. I have model PVT713WT-TBWR. Is this possible
I painted an outside door that is metal but is wood grained to look like wood with Kilz. The door was white. Then I covered the kilz with a regular semi gloss (Olympic). This was several years ago. ...
I am going to build a big square wooden planter, which I want to coat with concrete. Will I run into problems getting the concrete to adhere to the wood? and if so - is there a primer or something sim...
wood back door with mortice lock. key will not turn hence door is locked and will not open any idea,s how to open please
Just moved in to my new properly place & there is a Warnock Hersey woodburning stove in the basement. It`s the Voyager model, but I`d like t read the instruction manaul for it.
Anyone know w...
FireLite wood stove manuel mn#3000
we have a wood stove that has bricks in it. when we moved it from the home that we bought it from, my son removed some of the bricks in it to make it lighter to move. how do the bricks go back in. i n...
does anyone know about the outside wood burning hot air furnaces like "sure-flame" or "wadena"
I am thinking about installing a wood burning stove into a 1980s bungolow.
Any advice on just how to go about fitting a flue or chimmney.
Thanks Bram
Where to buy new rock wool for the inside of our wood stove
I have my Olympic wood burning fireplace insert pulled out in order to clean the fireplace flue. This stove was in the house when we bought it and we have used it for over twenty years. This is the fi...
what are the regs to build a 2 houre fire check of wood and plasterboardwall?
Wher do I find a manual for a Firelite wood stove model 3000?
to concrete is not a good idea,I believe. Sooner or later,it will fail again. These days,wood floors over concrete are free-floating,usually with some sort of underlayment like foam padding.
Im inaccurately looking for an inexpensive was to shred laeves & small branches to increase the rate of it turning in to mulch (also for it to look nicer). Anyone have some nowledge in this are...
I just recently installed a Stanley woodgrain fibreglass door. I stained the door and the all the trim around it with a Minwax gel stain.
Now my wife has decided that she doesn`t like the look of...
The Content on this site is provided for general information purposes only. It can not and should not be a substitute for face-to-face professional advice. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2009 DIY Forums |
Sponsored LinksLatest Posts
|
more posts...